Fpr/GRP Fiberglass Plastic Sheet Panel Automatical Production Line

Product Description

FRP sheet production machine,FRP sheet production line

Main data,
1,Function: this production line can produce corrugated roof sheet with color &transparent,common flat sheet,decorative sheet,etc.
2,Operation staff: 3-5 persons.
3,Production speed 2-12m/min
4,Sheet width maximum effective width of flat sheet is 1500mm
5,Wave height maximum 130mm
6,Sheet thickness 0.4mm-5mm
7,Machine dimension 50m (L) ×1.85m (W) × 3.5m (H)
8,Power requirement 80kw
 
Description,

We are an experienced manufacturer and exporter of a range of FRP lighting sheet production line,FRP gel coat sheet production line,FRP gutter production line and refrigerated truck body panel making machine,etc.

1,PLC automatical control system

Easy operation based on PLC intellectual control system,which could make production task and equipment operating data fast and intuitional. Short-term training could make operators complete the whole production process independently.

2, Resin storage system

The storage tank with the agitator motor, which could help mix the resin with the filler and color paste efficiently ,also to reduce the production cost.

3, Metering system

1>,Pulse-free metering system could achieve the precise metering and permit to add powder fillers, which could reduce the production cost.

2>,PLC intelligent control system makes every metering pump automatically match the ratio, no need set the proportion one by one.

4, Heating oven

PID controls temperature accurately, heating sectionalized, reduce power consumption under hot wind control, easily control curing of sheet, attain above 90% , to replace mould without shutting machine.

5,Impregnation system

Multi-line independent temperature control, able to adapt change of ambient temperature efficiently, quick impregnation effectively improving the speed of production.

6,Sheet thickness control system

In this area,there are both hard and soft sheet thickness rollers, which could achieve precise control thickness of the sheet. These two rollers have different functions, if you add the filler to the production, you should use the soft roller,because the hard roller can't permit the impurity pass through the film, furtherly easily scratch the film.

7,Cooling and cutting system

1>,Special cross cutting machine can synchronize with production. Many factories can't realize the synchronous production, because their cutting machine is static, can't moving with the sheet. So always there is a problem of off tracking.
2>,In air-cooling zone, our high-power fan can rapidly cool the sheet. 

8, Qualtiy package with strong wooden case,

9, With professional installation engineer team would install and train your workers within one month.Meantime,our professional after-sales service full serveice when you use the machine.